Advertise | Subscribe | Contact Us | About Us
Twitter
Facebook
autoprojobs.com

The Automotive Training Group Releases 2013 GM Engine Performance Course And Training Manual

May 28, 2013

The Automotive Training Group has released the 2013 GM Engine Performance 7‐hour course and training manual. Like all ATG products, this new GM Engine Performance class covers all of the newest GM technology, but emphasizes evolving failure patterns on older systems as well. With our tips and intuitive tests, you can quickly differentiate between electronic and mechanical issues plaguing the GM models most likely to come into your shop. Misfire, fuel trim, valve seat issues, cam timing faults and cylinder‐kill system failures can all cause similar symptoms and codes. This seminar helps you make a better ‘first pass’ to look for clues that create the shortest diagnostic path. We’ve been refining these ‘beat the flowchart’ methods for years, so you’ll find something you can use right away.

Other topics include:

• Camshaft Timing Systems

• Drive‐By‐Wire & Displacement On Demand

• Fuel Trim, Rear Fuel Trim & O2 Sensors

• Ignition Systems

• Position Signals & Relationships

• Direct Injection & Conventional Fuel Delivery

• All Emissions Systems 

For additional information, call 800-233-3182 or visit http://atgtraining.com.

 

More Articles in Engine

Performance Gaskets And Surface Finishes
The most critical engine gaskets are the head gaskets since they have to withstand the heat and pres...
 More»
Head Gasket Service On Subaru Outbacks
Head gasket failure has been something Subaru has struggled with to some extent since the 1980s. The...
 More»
 
© Copyright 2014 Babcox Media, Inc. All Rights Reserved
3550 Embassy Parkway, Akron, OH 44333
330-670-1234
(FAX) 330-670-0874