The ST05 from General Technologies provides a simple
interface for diagnostics on any oxygen sensor to quickly determine whether
the sensor is defective.
It is designed as both a stand-alone tool or as a
complement to any scanner during the diagnostic process.
The ST05 displays the
sensor’s output signal in real time in a bar graph, allowing to diagnose “lazy”
sensors that may not trigger DTCs, but cause driveability problems.
displays cross counts, can simulate rich and lean conditions, and has a test
mode to test the sensor’s response time, giving a Pass or Fail indication on a
Sensors can be tested on or off the vehicle.
General Technologies Corp.